Field 1: State the full legal name, address (including country) and legal tax
identification number of the exporter. Legal tax identification number is: in Canada,
employer number or importer/exporter number assigned by Revenue Canada; in Mexico, federal
taxpayers registry number (RFC); and in the United States, employers
identification number or Social Security Number.
Field 2: Complete field if the Certificate covers multiple shipments of identical goods
as described in Field #5 that are imported into a NAFTA country for a specified period of
up to one year (blanket period). "FROM" is the date upon which the Certificate
becomes applicable to the goods covered by a blanket Certificate (it may be prior to the
date of signing this Certificate). "TO" is the date upon which the blanket
period expires. The importation of a good for which preferential tariff treatment is
claimed based on this Certificate must occur between these dates.
Field 3: State the full legal name, address (including country) and legal tax
identification number, as defined in Field #1, of the producer. If more than one producers
good is included on the Certificate, attach a list of the additional producers, including
the legal name, address (including country) and legal tax identification number, cross
referenced to the good described in field #5. If you wish this information to be
confidential, it is acceptable to state "Available to Customs upon request". If
the producer and the exporter are the same, complete filed with "SAME". If the
producer is unknown, it is acceptable to state "UNKNOWN".
Field 4: State the full legal name, address (including country) and legal tax
identification number as defined in field #1 of the importer. If importer is not known,
state "UNKNOWN"; if multiple importers state "VARIOUS".
Field 5: Provide a full description of each good. The description should be sufficient
to relate it to the invoice description and the Harmonized System (H.S.) description of
the good. If the Certificate covers a single shipment of a good, include the invoice
number as shown on the commercial invoice. If not known, indicate another unique reference
number, such as the shipping order number.
Field 6: For each good described in field #5, identify the H.S. tariff classification
to six digits. If the good is subject to specific rule of origin in Annex 401 that
required eight digits, identify to eight digits, using the H.S. tariff classification of
the country into whose territory the good is imported.
Field 7: For each good described in field #5, state which criterion (A through F) is
applicable. The rules of origin are contained in Chapter Four and Annex 401. Additional
rules are described in Annex 703.2 (certain agricultural goods), Annex 300.8, Appendix 6A
(certain textile goods) and Annex 308.1 (certain automatic data processing goods and their
parts). NOTE: In order to be entitled to preferential tariff treatment, each good must
meet at least one of the criteria below
Preference Criteria
A The good is "wholly obtained or produced entirely" in the territory
of one or more of the NAFTA countries, as referred to in Article 415. NOTE: The purchase
of a good in the territory does not necessarily render it "wholly obtained or
produced". If the good is an agricultural good, see also criterion F and Annex 703.2.
(Reference Article 401(a) and 415)
B The good is produced entirely in the territory of one or more of the NAFTA countries
and satisfies the specific rule of origin set out in Annex 401 that applies to its tariff
classification. The rule may include a tariff classification change, regional
value-content requirement or a combination thereof. The good must also satisfy all other
applicable requirements of Chapter Four. If the good is an agricultural good, see also
criterion F and Annex 703.2. (Reference Article 401 (b))
C The good is produced entirely in the territory of one or more of the NAFTA countries
exclusively from originating materials. Under this criterion, one or more of the materials
may not fall within the definition of "wholly produced or obtained" as set out
in Article 415. All materials used in the production of the good must qualify as
"originating" by meeting the rules of Article 401 (a) through (d). If the good
is an agricultural good, see also criterion F and Annex 703.2. (Reference Article 401 (c))
D Goods are produced in the territory of one or more of the NAFTA countries but do not
meet the applicable rule of origin, set out in Annex 401, because certain non-originating
materials do not undergo the required change in tariff classification. The goods do
nonetheless meet the regional value content requirement specified in Article 401 (d). This
criterion is limited to the following two circumstances:
1. The good was imported into the territory of a NAFTA country in an unassembled or
disassembled form, but was classified as an assembled good, pursuant to the H.S. General
Rule of Interpretation 2(a); or
2. The good incorporated one or ore non-originating materials, provided for as parts under
the H.S., which could not undergo a change in tariff classification because the heading
provided for both the good and its parts and was not further subdivided into subheadings,
or the subheading provided for both the good and its parts and was not further subdivided.
NOTE: This criterion does not apply to Chapters 51 through 63 of the H.S. (Reference
Article 401 (d))
E Certain automatic data processing goods and their parts, unspecified in Annex 308.1
that do not originate in the territory are considered originating upon importation into
the territory of a NAFTA country from the territory of another NAFTA country when the
Most-Favoured-Nation Tariff rate of the good conforms to the rate established in Annex
308.1 and is common to all NAFTA countries. (Reference Annex 308.1)
F The good is an originating agricultural good under preference criterion A, B, or C
and is not subject to a quantitative restriction in the importing NAFTA country because it
is a "qualifying good" as defined in Annex 703.2, Section A or B (please
specify). A good listed in Appendix 703.2.8.7 is also exempt from quantitative
restrictions and is eligible for NAFTA preferential tariff treatment if it meets the
definition of "qualifying good" in Section A of Annex 703.2. NOTE 1:This
criterion does not apply to goods that wholly originate in Canada or the United States and
are imported into either country. NOTE 2: A tariff rate quota is not a quantitative
restriction.
Field 8: For each good described in field #5, state "YES" if you are the
producer of the good. If you are not the producer of the good, state "NO"
followed by (1), (2), or (3) depending on whether this Certificate was based upon: (1)
your knowledge of whether the good qualifies as an originating good; (2) your reliance on
the producers written representation (other than a Certificate of Origin) that the
good qualifies as an originating good; or (3) a completed and signed Certificate for the
good, voluntarily provided to the exporter by the producer.
Field 9: For each good described in field #5, where the good is subject to a regional
value content (RVC) requirement, indicate "NO" if the RVC is calculated
according to the net cost method; other wise, indicate "NO". If the RVC is
calculated according to the net cost method over a period of time, further identify the
beginning and ending dates (DD/MM/YY) of the period. (References Articles 402.1, 402.5)
Field 10: Identify the name of the country ("MX" or "US" for the
agricultural and textile goods exported to Canada; "US" or "CA" for
all goods exported to Mexico; or "CA" or "MX" for all goods exported
to the United States) to which preferential rate of customs duty applies, as set out in
Annex 302.2, in accordance with the Marking Rules for each Partys schedule of tariff
elimination.
For all other originating goods exported to Canada, indicate appropriately "MX"
or "US" if the goods originate in that NAFTA country, within the meaning of the
NAFTA Rules of Origin Regulations and any subsequent processing in the other NAFTA country
does not increase the transaction value of the goods by more than 7% otherwise indicate
"JNT" for joint production. (Reference Annex 302.2)
Field 11: This field must be completed, signed and dated by the exporter. When the
Certificate is completed by the producer for use by the exporter, it must be completed,
signed and dated by the producer. The date must be the date the Certificate was completed
and singed.
This form supplied by J.W. Smith Customs Broker Ltd.